HDPE (HDPE, Backing Ring, Flange)
HDPE (HDPE, Backing Ring, Flange)
SK Fitting Valve presents an HDPE stub flange with a wide range of features to choose. These flanges can be made from a variety of materials and come in several sizes, based on the purpose of the customer’s need.
Related products
FlangeSO – Slip On Flange
Read moreA Slip-On Flange (SO Flange) is designed with an inner diameter slightly larger than the outside diameter of the pipe, allowing the pipe to slip into the flange before welding. The flange is then secured to the pipe using fillet welds on both the inside and outside to ensure sufficient strength and prevent leakage.
- Flange
SW – Socket Weld Flange
Read moreSW – Socket Weld Flangeล is a flange with the bore as a socket to connect to the pipe. It’s connected to the outside on the shoulder that doesn’t require welding. The external welds are fillet welds, so the integrity of the welds cannot be checked by radiographic methods. This type of flange is used for high-pressure pipes that are smaller than the flange itself. This type of flange has internal weld holes to allow liquid or gas to flow through the pressure pipe. SK Fitting Valve has welded flanges manufactured in a variety of material grades and sizes that meet the purpose of use.
- Flange
Stub End Flange
Read moreS.K. Fitting Valve offers flanges for fittings. Liver ligament, both flat surface and raised surface We have a wide range of stubs and flanges for you to choose. Whether it’s material grade or size such as 3/8″”~80″” and DN10~DN2000.
