Gate Valve
Gate Valve
Gate Valve imported from Japan, good properties, resistant to high friction. Suitable for on-off work, water blocking.
Material: brass, nickel plated brass, cast iron, stainless steel, ductile cast iron, ductile iron
Pressure: 10K,20K,125P,150P,800P, PN16, PN25 Type: thread, flange, weld
A sluice valve, also known as a gate valve, is a valve that allows a fluid, such as liquid, to flow through a line. It should be switched on or off till the very end. Isolated valves are used in all gate valves.
Related products
ValveGlobe Valve
Read moreGlobe Valve adjusts the flow rate. By controlling the gap between the disc and the seat
- Valve
Solenoid Valve
Read moreSolenoid Valve is a valve used to control the direction of air (or fluid) by energizing an electrical coil, together with a spring return or a second coil when the valve must move to/hold another position. When current flows through the coil, the magnetic field pulls the plunger/armature to shift the valve; when power is removed, a spring (typical for single-solenoid designs) returns the valve to its normal position.
- Valve
Safety Valve
Read moreSafety Valve also known as “Safety valve” or “Safety”, is a safety device of the system. Its main function is to release the pressure inside the system. The valve will automatically operate when the pressure exceeds the set value. This type of valve is used for compressible fluids such as steam or gases that require rapid pressure relief.
